OpenWrt en Homestation ADB P.DG A4001N

Por fin hay soporte para bcm6328 en OpenWrt... la cosa promete y ya el kernel inicialmente arranca y detecta el micro correctamente (aunque falta adaptar OpenWrt a este modelo)..



Booting from latest image (0xb8010000) ...
Code Address: 0x80010000, Entry Address: 0x80010000
LZMA: Prossible old LZMA format, trying to decompress..
Decompression OK!
Entry at 0x80010000
Closing network.
Disabling Switch ports.
Flushing Receive Buffers...
3 buffers found.
Closing DMA Channels.
Starting program at 0x80010000
[    0.000000] Linux version 3.3.7 (chisco@chisco-aluminio) (gcc version 4.6.3 20120201 (prer2
[    0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[    0.000000] CPU frequency is 320 MHz
[    0.000000] 32MB of RAM installed
[    0.000000] registering 32 GPIOs
[    0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[    0.000000] board_bcm963xx: Boot address 0xb8000000
[    0.000000] board_bcm963xx: CFE version: unknown
[    0.000000] board_bcm963xx: unknown bcm963xx board: 963281T_TEF
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[    0.000000] Kernel panic - not syncing: unable to detect bcm963xx board

gracias al comando led scan todos los leds han quedado identificados...

ADSL GREEN on gpio ..............  03 

ADSL RED  on gpio     ...........  05 

Wireless GREEN on gpio ..........  09 

Wireless RED led on gpio ........  10 

Remote Service GREEN on gpio ....  06 

Remote Service RED led on gpio ..  07 

ETH GREEN on gpio ...............  31 

ETH Fail RED on gpio ............  20 

Wan data GREEN on gpio ..........  11 

Wan data RED on gpio ............  02 

Power ON GREEN on gpio  .........  04 

STOP CFE RED on gpio  ...........  08 

VOIP1 led on gpio ................ 06 


mañana más...


PD: siempre podremos volver al fw orignal que viene con el software de telefónica